The SatPal Controller, together with the SatPal app, is an all-in-one antenna installation tool, allowing installers and DTH operators to control the quality of their antenna installations. It includes a Sat Finder, a professional grade Sat Meter and a unique installation wizard that generates comprehensive reports with a click of a button.

The Sat Finder feature is location-based (GPS) and helps the installer quickly identify the dish alignment direction with the exact azimuth and elevation angles for the dish as well as the tilt angle for the LNB. The Sat Meter includes a realtime spectrum analyzer and allows professional measurements of signal strength and quality, MER, BER, PER, C/N and link margin. There is also a buzzer to further help optimizing the reception performance based on signal level and signal quality.

The simple Install & Report wizard generates a comprehensive report in various formats including the installer's contact details, installation location including a map, an inventory list with model numbers and serial numbers of the equipment that was installed (scanned or manually input), photos of the installation and measurement data of all the received transponders, which the installer can email with a click and maintain full traceability of all their field installations.

In addition, the SatPal Controller functions as a programmer for Inverto’s Unicable II LNB’s and multiswitches. The SatPalapp allows the installer to create configuration files and upload them to the devices, for example, when there is a change in the transponder line up of an operator or MDU installation using dCSS LNBs in Static mode. The configuration files can be stored locally on the smartphone, on the cloud or in the SatPal Controller's memory to be transmitted from it directly by pressing a button. The app also allows firmware upgrades and access to diagnosis information stored on Unicable II devices.

All features packed into an affordable, small and handy tool, the SatPal solution guarantees increased productivity for installers
and a significant reduction of cost of service for operators.
  • SatPal iOS and Android apps + SatPal Controller
  • Sat Finder and dish alignment tool with location guidance (GPS-based)
  • Satellite meter with real-time spectrum analyzer measuring MER, output level, C/N, link margin, BER and PER
  • Working with Universal or Unicable/dCSS (EN50494/EN50607) LNBs
  • Installation report generator including location, installer’s details, signal measurements, inventory list and photos
  • Unicable II/dCSS programmer and diagnosis tool*
  • Powered by battery, STB or AC/DC adapter
  • Lightweight, mobile solution
* Only for Inverto compatible Unicable II ODU products


SatPal package content:

1x SatPal Controller
1x Portable battery
1x Neck strap
1x Car charger
2x Micro USB cables (data/power)
3x Battery holding bands
1x Quick guide
1x Carrying case

Technical specification
Frequency range

Satellite (LNB/Multiswitch and receiver ports)
950 MHz ~ 2150 MHz
Wireless connectivity 2.4 GHz

LNB/Multiswitch 1x Satellite IF, DVB-S/S2*, 13 V / 18 V DC out, 0 kHz / 22 kHz, F-type (*excluding the ACM/VCM modes for DVB-S2)
1x Satellite IF loop-through out, 13 V / 18 V DC in, F-type
PC (data)
1x PC data communication, micro USB
Wireless data 1x IEEE 802.15.1 Low Energy (ver. 4.0)
DC input
1x DC input, micro USB

Loop-through loss (Satellite) 1 dB max.
LNB/Multiswitch control protocols
DiSEqC™ 2.0, EN50494 (Unicable/SatCR), EN50607 (Unicable II™/dCSS)

Display and keys Status LED
Wireless connectivity LED
Power LED
Function button
Satellite signal strength bar (0% ~ 100%)
Satellite signal quality bar (0% ~ 100%)

Power supply
DC input
5 V ~ 6 V DC / 13 W max. (DC in, micro USB)
10 V ~ 20 V DC / 13 W max. (IF loop-through, F-type)
SatPal™ Controller
(without power supply to LNB/Multiswitch)
5 V DC, 350 mA (can be powered over the USB data interface)
Power supply to LNB/Multiswitch
14 V ~18 V, 400 mA max.

Operating temperature
0 °C ~ +45 °C
150 mm x 100 mm x 30 mm (w x d x h)
Low Voltage Directive (2014/35/EU)
Electromagnetic Compatibility Directive (2014/30/EU)
Eco-Design Directive (2009/125/EC)
Radio Equipment Directive (2014/53/EU)

SatPal™ package content: 1x SatPal™ Controller
1x Portable battery
1x Neck strap
1x Car charger
2x Micro USB cables (data/power)
3x Battery holding bands
1x Quick guide
1x Carrying case
Logistical info
Packaging dimensions (W x D x H)
8.5 cm x 22 cm x 28.5 cm
Packaging weight
0.99 Kg
Quantity per carton
Carton dimensions (W x D x H) 460 cm x 445 cm x 590 cm
Carton weight
20.6 kg
Quantity per pallet

© 2024 FTA Communication Technologies S.à r.l.   Legal terms of usePrivacy policy Site by Medya-T