This Unicable combiner supports the combination of two RF signals. It enables control signals and DiSEqC commands sent from the Set Top Box to the LNB as well as DiSEqC commands sent from the LNBs to the Set Top Box. This high-quality Unicable combiner features low insertion loss, high RF isolation between the input ports and allows greater flexibility in single home or MDU installation scenarios. Typically, the combiner would be installed at a central location (i.e. roof’s attic) to combine signals of two Unicable LNBs or Multiswitches to one coax cable stretched inside the house/apartment to a Set Top Box.

Main Features:
  • Bi-directional signal distribution
  • Low insertion loss
  • High isolation between input
  • Protective diodes for DC isolation at each input port

Technical specifications
Frequency range
950 MHz ~ 2300 MHz
Inputs
2x F-type, female
Output
1x F-type, female
Insertion loss
4 dB max.
Isolation between ports
18 dB min.
Input return loss
10 dB max.
Output return loss
10 dB max.
DC & 22 kHz pass from Output to Input
Yes
Impedance
75 Ω
Operating temperature
-30° C ~ +60° C
Weight
39 g
Dimensions (W x D x H)
58.5 mm x 50 mm x 16.3 mm
Logistical info
Quantity per carton

150
Carton dimensions (W x D x H)
42.4 cm x 38.8 cm x 62 cm
Carton weight
6.7 kg


© 2024 FTA Communication Technologies S.à r.l.   Legal terms of usePrivacy policy Site by Medya-T